Cast Steel Gate Valve size Ranges: 1/2” through 48”
- Pressure Ratings: ANSI #150 to 2500, PN16 to PN160
- Standards compliance: API 600, ASME B16.34 or equivalents
- Materials: Cast Carbon Steel, Cast Stainless Steel, Cast Duplex or Other Specials
- End Connections: Flanged (FF, RF, RTJ) to international standards
- OS&Y, Outside Stem and Yoke
- Metal-sealed (API Trim # 1, #5, #8, #10 etc.)
- Optional Locking Device or Stem Extension
- Optional Direct Mounting for actuators
- Full Port Gate valve
- Handwheel, gearbox or actuated options

Forged Steel Gate valve size Ranges: ½” through 2”
- Pressure Ratings: ANSI #150 to 2500 including 800lb, PN16 to PN160
- Standards compliance: API 602, ASME B16.34, DIN3202 or equivalents
- Materials: Forged Carbon Steel, Forged Stainless Steel, Forged Duplex or Other Specials
- End Connections: Screwed, Socket Welded Ends (SW) butt weld ends (BW) and Flanged (FF, RF, RTJ) to international standards
- OS&Y, Outside Stem and Yoke
- Metal-sealed (API Trim # 1, #5, #8, #10 etc.)
- Optional Locking Device or Stem Extension
- Optional Bolted Bonnet, Welded Bonnet or Pressure Sealed Bonnet
- Optional Direct Mounting to ISO 5211 for actuator
- Reduced Port option

Ball valve size Ranges: 1/2” through 4”
- One-, two- or three-Piece Ball valves
- Pressure Ratings: 800 WOG 1000WOG, 2000WOG, 3000WOG or ANSI #150 to 2500
- Standards compliance: API 6D, BS 5351, ASME B16.34, DIN 3202 or equivalents
- Materials: Cast or Forged Carbon Steel, Stainless Steel, Duplex or Other Specials
- End Connections: Threaded or Welded Ends to international standards
- Optional Locking Device or Stem Extension
- Optional Direct Mounting to ISO 5211 for actuator
- Full Port or Regular Bore
- Seals to suit steam, water and other fluids and gases

Parallel Slide Gate valve size range 2” to 48”
- Pressure Ratings: ANSI #150 to 2500
- Standards compliance: API 6D, API 6A or equivalents
- Materials: Cast Carbon Steel, Cast Stainless Steel, Cast Duplex or Other Specials
- Ends Connections: Flanged (FF, RF, RTJ) to international standards
- OS&Y, Outside Stem and Yoke
- Metal-sealed (13Cr, Steel, 316, 304 etc)
- Optional Locking Device or Stem Extension
- Optional Direct Mounting to ISO 5211
- Full Port
- Handwheel, gearbox or actuated options

Non-Return Valve – NRV sizes 2” to 60”
- Design & Manufactured to API 6D, API 594, ASME B16.34 or Equivalent - P.T Ratings to ASME B16.34
- Face to Face Dimensions to ASME B16.10 - Flanged Ends to ASME B16.5
- Butt-weld Ends to ASME B16.25 - Valves Marking to MSS SP-25
- Inspect & Tested to API 598
- Structured in One Piece Union Body
- Pressure Ratings from Class 150 to Class 2500, PN16 to PN420
- Ends Connections in Flanged R.F or RTJ, Wafer, Fully Lugged and Grooved
- A variety of body and trim material is offered, including carbon steel ASTM A216 WCB, WCC, Low Carbon Steel LCB, LCC, Alloy Steel WC6, WC9, C5, Stainless Steel CF8, CF8M, CF3, CF3M, Duplex & Super Duplex Steel A890 GR. 4A, 5A or F51, Special Materials in Monel, Alu. Bronze C95800, 95600 etc. Coatings may be provided for added corrosion or wear resistance. Hard-facing and weld overlays may also be supplied. Seats Options with metal-to-metal or bubble-tight resilient.
- Optional Bypass system & Counter-weight Assembly.